Connecting Load Cell to Raspberry Pi VIA ADS1115
Post ReplyConnecting Load Cell to Raspberry Pi VIA ADS1115Posted: Saturday, February 11, 2017 [18:53:07] - 1
Wiring: Connect the ADC to the Pi as follows: ADS1x15 VDD to Raspberry Pi 3.3V ADS1x15 GND to Raspberry Pi GND ADS1x15 SCL to Raspberry Pi SCL ADS1x15 SDA to Raspberry Pi SDA Library Install: Please check the Adafruit page for library installation: https://learn.adafruit.com/raspberry-pi-analog-to-digital-converters/ads1015-slash-ads1115 It turned-ut to be much simpler and straight-forward setup than using an HX711 module. No additional hardware needed. |
RE: Connecting Load Cell to Raspberry Pi VIA ADS1115Posted: Thursday, May 19, 2022 [12:40:53] - 2
Posted by:KimPosts: 1 | Thanks! You've saved me a few hours of searching the Internet |